AIO Hydrogen Sulfide Removal Systems | Sulfur Water Filters

AIO HYDROGEN SULFIDE REMOVAL SYSTEMS

We Only sell Wholesale | Same day shipping

Get rid of rotten egg smell for good with AIO hydrogen sulfide removal systems from All For Water. Air Injection Oxidation (AIO) filters are one of the most effective chemical-free ways to remove hydrogen sulfide (H2S), iron, and manganese from well water, making them the go-to sulfur water filter for dealers, installers, and water treatment professionals.

How Air Injection Hydrogen Sulfide Filters Work

An AIO system keeps a pocket of compressed air at the top of the mineral tank. As water passes through this air head, dissolved hydrogen sulfide, iron, and manganese are oxidized into solid particles that are captured by the catalytic filter media below. During backwash, the control valve flushes the trapped contaminants to drain and draws in fresh air to recharge the oxidation zone, so the system regenerates itself automatically with no chlorine, hydrogen peroxide, or potassium permanganate.

Benefits of AIO Sulfur Water Filters

  • Removes hydrogen sulfide (rotten egg odor), iron, and manganese in a single tank
  • 100% chemical-free treatment, with no feed pumps, solution tanks, or refills
  • Self-regenerating air pocket refreshed with every backwash cycle
  • Stops black, orange, and brown staining on fixtures and laundry
  • Protects water softeners, RO membranes, water heaters, and plumbing from fouling
  • Low maintenance and low operating cost for residential, commercial, and light industrial wells

Choosing the Right Hydrogen Sulfide Removal System

Sizing an AIO filter depends on your hydrogen sulfide, iron, and manganese levels, along with pH, flow rate, and well pump capacity. For best results, test the raw water before selecting a system. AIO filters work best on low to moderate H2S levels; very high concentrations may call for chemical injection or a combined treatment approach. Our technical team can help you size the correct system for your application.

Frequently Asked Questions

What causes the rotten egg smell in well water?

The smell comes from dissolved hydrogen sulfide gas, usually produced by sulfur-reducing bacteria or natural geology in the aquifer. Even very low concentrations are noticeable.

Does an AIO filter need chemicals?

No. AIO systems use oxygen from air to oxidize contaminants, then regenerate automatically through backwashing.

Should an AIO filter go before a water softener?

Yes. Installing the AIO system ahead of a softener or RO system removes sulfur, iron, and manganese first, protecting downstream resin and membranes.

All For Water supplies wholesale AIO hydrogen sulfide removal systems, replacement media, and components to dealers and contractors throughout Florida, the Caribbean, and Latin America. Contact us for volume pricing and technical support.

<h2>16" x 65" AIO Hydrogen Sulfide Filter for Well Water</h2>
<p>Get rid of the rotten egg smell for good. The 16x65 AIO is a complete single-tank <strong>air injection hydrogen sulfide filter</strong> that removes sulfur odor, iron, and manganese from well water with no chlorine, peroxide, or potassium permanganate. Its 16" x 65" tank holds the most filter media in our AIO line, making it a commercial-grade sulfur water filter for businesses, farms, multi-family buildings, estates, and other high-demand applications.</p>
<h2>How the AIO Sulfur Filter Works</h2>
<p>The WS1EE control valve maintains a pocket of air at the top of the tank. As water passes through the air head, dissolved hydrogen sulfide (H2S), iron, and manganese are oxidized into solid particles that are trapped by the media bed. During each automatic backwash, the trapped contaminants are flushed to drain and fresh air is drawn in to recharge the oxidation zone, so the system regenerates itself with no chemicals to add.</p>
<h2>Key Features</h2>
<ul>
<li>Removes hydrogen sulfide (rotten egg odor)</li>
<li>100% chemical-free air injection oxidation</li>
<li>Self-regenerating air pocket recharged on every backwash cycle</li>
<li>WS1EE control valve with automatic, programmable backwash</li>
<li>Stops black, orange, and brown staining on fixtures, laundry, and equipment</li>
<li>Protects water softeners, RO systems, water heaters, and process equipment from sulfur and iron fouling</li>
<li>Commercial-size 16" x 65" tank with our deepest, widest media bed for maximum capacity</li>
</ul>
<h2>Specifications</h2>
<table>
<tbody>
<tr>
<td>Part number</td>
<td>16x65-AIO</td>
</tr>
<tr>
<td>Tank size</td>
<td>16" x 65"</td>
</tr>
<tr>
<td>Control valve</td>
<td>WS1EE</td>
</tr>
<tr>
<td>Media volume</td>
<td>4 ft3</td>
</tr>
<tr>
<td>Inlet / outlet</td>
<td>1" or 1.25"</td>
</tr>
</tbody>
</table>
<h2>What's Included</h2>
<ul>
<li>16" x 65" mineral tank</li>
<li>WS1EE air injection control valve</li>
<li>4 ft3 of filter media</li>
<li>Support bed and distributor tube</li>
</ul>
<h2>Is the 16x65 the Right Size?</h2>
<p>The 16" x 65" AIO filter is built for commercial, agricultural, and high-demand residential applications. A tank this size requires a substantial backwash flow, so confirm that your well pump can deliver the backwash flow rate the system requires before installing. Also check that your installation area has enough ceiling clearance for the tall 65" tank and control valve. For very large homes with more moderate demand, consider the 14" x 65" model, or browse our full range of <a href="/aio-hydrogen-sulfide-removal-systems">AIO hydrogen sulfide removal systems</a>.</p>
<h2>Frequently Asked Questions</h2>
<h3>Will this filter remove the rotten egg smell from my well water?</h3>
<p>Yes. The air injection process oxidizes hydrogen sulfide gas, the cause of the rotten egg smell, and the media bed filters it out.</p>
<h3>Does an AIO filter use chemicals or salt?</h3>
<p>No. It uses oxygen from air to oxidize contaminants and regenerates automatically by backwashing.</p>
<h3>Does it need electricity?</h3>
<p>Yes. The control valve plugs into a standard outlet to run its automatic backwash schedule.</p>
<h3>Should it be installed before a water softener?</h3>
<p>Yes. Install the AIO filter ahead of a softener or RO system to protect resin and membranes from sulfur, iron, and manganese.</p>
<h3>Is the 16x65 AIO suitable for commercial use?</h3>
<p>Yes. Its large media bed makes it well suited to businesses, farms, multi-family buildings, and other applications with high water demand.</p>
<h3>What is the difference between the 14x65 and 16x65 AIO?</h3>
<p>Both tanks are 65" tall, but the 16x65 is wider and holds more filter media, giving it the most capacity in our AIO line. The 14x65 suits very large homes and needs less backwash flow from the well pump.</p>

16" X 65" Aio Hydrogen Sulfide Filter System | Commercial Air Injection Sulfur Water Filter

Eliminate rotten egg smell, iron, and manganese from well water without chemicals. This 16" x 65" AIO (Air Injection Oxidation) hydrogen sulfide filter uses a self-regenerating air pocket and 4 ft3 of filter media, controlled by a WS1EE valve. Our highest-capacity AIO sulfur water filter for commercial, agricultural, and high-demand applications. Part # 16x65-AIO.

View product
<h2>14" x 65" AIO Hydrogen Sulfide Filter for Well Water</h2>
<p>Get rid of the rotten egg smell for good. The 14x65 AIO is a complete single-tank <strong>air injection hydrogen sulfide filter</strong> that removes sulfur odor, iron, and manganese from well water with no chlorine, peroxide, or potassium permanganate. Its 14" x 65" tank holds the most filter media in our AIO line, making it a heavy-duty sulfur water filter for very large homes, high water demand, farms, small businesses, and light commercial applications.</p>
<h2>How the AIO Sulfur Filter Works</h2>
<p>The WS1EE control valve maintains a pocket of air at the top of the tank. As water passes through the air head, dissolved hydrogen sulfide (H2S), iron, and manganese are oxidized into solid particles that are trapped by the media bed. During each automatic backwash, the trapped contaminants are flushed to drain and fresh air is drawn in to recharge the oxidation zone, so the system regenerates itself with no chemicals to add.</p>
<h2>Key Features</h2>
<ul>
<li>Removes hydrogen sulfide (rotten egg odor)</li>
<li>100% chemical-free air injection oxidation</li>
<li>Self-regenerating air pocket recharged on every backwash cycle</li>
<li>WS1EE control valve with automatic, programmable backwash</li>
<li>Stops black, orange, and brown staining on fixtures and laundry</li>
<li>Protects water softeners, RO membranes, and water heaters from sulfur and iron fouling</li>
<li>Extra-large 14" x 65" tank with our deepest, widest media bed for maximum capacity</li>
</ul>
<h2>Specifications</h2>
<table>
<tbody>
<tr>
<td>Part number</td>
<td>14x65-AIO</td>
</tr>
<tr>
<td>Tank size</td>
<td>14" x 65"</td>
</tr>
<tr>
<td>Control valve</td>
<td>WS1EE</td>
</tr>
<tr>
<td>Media volume</td>
<td>3 ft3</td>
</tr>
<tr>
<td>Inlet / outlet</td>
<td>1" or 1.25"</td>
</tr>
</tbody>
</table>
<h2>What's Included</h2>
<ul>
<li>14" x 65" mineral tank</li>
<li>WS1EE air injection control valve</li>
<li>3 ft3 of filter media</li>
<li>Support bed and distributor tube</li>
</ul>
<h2>Is the 14x65 the Right Size?</h2>
<p>The 14" x 65" AIO filter is built for very large households, farms, and light commercial applications with high water demand. Because a larger tank needs more water to backwash properly, confirm that your well pump can deliver the backwash flow rate the system requires. Also check that your installation area has enough ceiling clearance for the tall 65" tank and control valve. For large homes with more moderate demand, consider the 13" x 54" model, or browse our full range of <a href="/aio-hydrogen-sulfide-removal-systems">AIO hydrogen sulfide removal systems</a>.</p>
<h2>Frequently Asked Questions</h2>
<h3>Will this filter remove the rotten egg smell from my well water?</h3>
<p>Yes. The air injection process oxidizes hydrogen sulfide gas, the cause of the rotten egg smell, and the media bed filters it out.</p>
<h3>Does an AIO filter use chemicals or salt?</h3>
<p>No. It uses oxygen from air to oxidize contaminants and regenerates automatically by backwashing.</p>
<h3>Does it need electricity?</h3>
<p>Yes. The control valve plugs into a standard outlet to run its automatic backwash schedule.</p>
<h3>Should it be installed before a water softener?</h3>
<p>Yes. Install the AIO filter ahead of a softener or RO system to protect resin and membranes from sulfur, iron, and manganese.</p>
<h3>What is the difference between the 13x54 and 14x65 AIO?</h3>
<p>The 14x65 has the largest tank and media bed in our AIO line, giving it the most capacity for very large homes, farms, and light commercial use. The 13x54 suits large households and needs less backwash flow and ceiling height.</p>

14" X 65" Aio Hydrogen Sulfide Filter System | Air Injection Sulfur Water Filter for Well Water

View product
<h2>13" x 54" AIO Hydrogen Sulfide Filter for Well Water</h2>
<p>Get rid of the rotten egg smell for good. The 13x54 AIO is a complete single-tank <strong>air injection hydrogen sulfide filter</strong> that removes sulfur odor, iron, and manganese from well water with no chlorine, peroxide, or potassium permanganate. Its large 13" x 54" tank holds the most filter media in our residential AIO line, making it a heavy-duty whole-house sulfur water filter for large homes, high water demand, farms, and light commercial applications.</p>
<h2>How the AIO Sulfur Filter Works</h2>
<p>The WS1EE control valve maintains a pocket of air at the top of the tank. As water passes through the air head, dissolved hydrogen sulfide (H2S), iron, and manganese are oxidized into solid particles that are trapped by the media bed. During each automatic backwash, the trapped contaminants are flushed to drain and fresh air is drawn in to recharge the oxidation zone, so the system regenerates itself with no chemicals to add.</p>
<h2>Key Features</h2>
<ul>
<li>Removes hydrogen sulfide (rotten egg odor)</li>
<li>100% chemical-free air injection oxidation</li>
<li>Self-regenerating air pocket recharged on every backwash cycle</li>
<li>WS1EE control valve with automatic, programmable backwash</li>
<li>Stops black, orange, and brown staining on fixtures and laundry</li>
<li>Protects water softeners, RO membranes, and water heaters from sulfur and iron fouling</li>
<li>Large 13" x 54" tank with a deep, wide media bed for maximum capacity</li>
</ul>
<h2>Specifications</h2>
<table>
<tbody>
<tr>
<td>Part number</td>
<td>13x54-AIO</td>
</tr>
<tr>
<td>Tank size</td>
<td>13" x 54"</td>
</tr>
<tr>
<td>Control valve</td>
<td>WS1EE</td>
</tr>
<tr>
<td>Media volume</td>
<td>2.5 ft3</td>
</tr>
<tr>
<td>Inlet / outlet</td>
<td>1" or 1.25"</td>
</tr>
</tbody>
</table>
<h2>What's Included</h2>
<ul>
<li>13" x 54" mineral tank</li>
<li>WS1EE air injection control valve</li>
<li>2.5 ft3 of filter media</li>
<li>Support bed and distributor tube</li>
</ul>
<h2>Is the 13x54 the Right Size?</h2>
<p>The 13" x 54" AIO filter is built for large households, homes with high water demand, and light commercial applications. Because a larger tank needs more water to backwash properly, confirm that your well pump can deliver the backwash flow rate the system requires before installing. For mid-to-large homes, consider the 12" x 48" model, or browse our full range of <a href="/aio-hydrogen-sulfide-removal-systems">AIO hydrogen sulfide removal systems</a>.</p>
<h2>Frequently Asked Questions</h2>
<h3>Will this filter remove the rotten egg smell from my well water?</h3>
<p>Yes. The air injection process oxidizes hydrogen sulfide gas, the cause of the rotten egg smell, and the media bed filters it out.</p>
<h3>Does an AIO filter use chemicals or salt?</h3>
<p>No. It uses oxygen from air to oxidize contaminants and regenerates automatically by backwashing.</p>
<h3>Does it need electricity?</h3>
<p>Yes. The control valve plugs into a standard outlet to run its automatic backwash schedule.</p>
<h3>Should it be installed before a water softener?</h3>
<p>Yes. Install the AIO filter ahead of a softener or RO system to protect resin and membranes from sulfur, iron, and manganese.</p>
<h3>What is the difference between the 12x48 and 13x54 AIO?</h3>
<p>The 13x54 has a larger tank that holds more filter media, giving it the most capacity for large homes and high water demand. The 12x48 suits mid-to-large households and needs less backwash flow from the well pump.</p>

13" X 54" Aio Hydrogen Sulfide Filter System | Air Injection Sulfur Water Filter for Well Water

Eliminate rotten egg smell, iron, and manganese from well water without chemicals. This 13" x 54" AIO (Air Injection Oxidation) hydrogen sulfide filter uses a self-regenerating air pocket and 2.5 ft3 of filter media, controlled by a WS1EE valve. Our highest-capacity residential sulfur water filter for large homes and light commercial use. Part # 13x54-AIO.

View product
<h2>12" x 48" AIO Hydrogen Sulfide Filter for Well Water</h2>
<p>Get rid of the rotten egg smell for good. The 12x48 AIO is a complete single-tank <strong>air injection hydrogen sulfide filter</strong> that removes sulfur odor, iron, and manganese from well water with no chlorine, peroxide, or potassium permanganate. Its wide 12" diameter tank holds more filter media than smaller models, making it a high-capacity whole-house sulfur water filter for larger homes, higher water demand, and light commercial applications.</p>
<h2>How the AIO Sulfur Filter Works</h2>
<p>The WS1EE control valve maintains a pocket of air at the top of the tank. As water passes through the air head, dissolved hydrogen sulfide (H2S), iron, and manganese are oxidized into solid particles that are trapped by the media bed. During each automatic backwash, the trapped contaminants are flushed to drain and fresh air is drawn in to recharge the oxidation zone, so the system regenerates itself with no chemicals to add.</p>
<h2>Key Features</h2>
<ul>
<li>Removes hydrogen sulfide (rotten egg odor)</li>
<li>100% chemical-free air injection oxidation</li>
<li>Self-regenerating air pocket recharged on every backwash cycle</li>
<li>WS1EE control valve with automatic, programmable backwash</li>
<li>Stops black, orange, and brown staining on fixtures and laundry</li>
<li>Protects water softeners, RO membranes, and water heaters from sulfur and iron fouling</li>
<li>Wide 12" tank holds more media for larger homes and higher water demand</li>
</ul>
<h2>Specifications</h2>
<table>
<tbody>
<tr>
<td>Part number</td>
<td>12x48-AIO</td>
</tr>
<tr>
<td>Tank size</td>
<td>12" x 48"</td>
</tr>
<tr>
<td>Control valve</td>
<td>WS1EE</td>
</tr>
<tr>
<td>Media volume</td>
<td>2 ft3</td>
</tr>
<tr>
<td>Inlet / outlet</td>
<td>1" or 1.25"</td>
</tr>
</tbody>
</table>
<h2>What's Included</h2>
<ul>
<li>12" x 48" mineral tank</li>
<li>WS1EE air injection control valve</li>
<li>2 ft3 of filter media</li>
<li>Support bed and distributor tube</li>
</ul>
<h2>Is the 12x48 the Right Size?</h2>
<p>The 12" x 48" AIO filter is designed for larger households and homes with higher water demand. Because a wider tank needs more water to backwash properly, confirm that your well pump can deliver the backwash flow rate the system requires before installing. For average-size homes, consider the 10" x 54" model, or browse our full range of <a href="/aio-hydrogen-sulfide-removal-systems">AIO hydrogen sulfide removal systems</a>.</p>
<h2>Frequently Asked Questions</h2>
<h3>Will this filter remove the rotten egg smell from my well water?</h3>
<p>Yes. The air injection process oxidizes hydrogen sulfide gas, the cause of the rotten egg smell, and the media bed filters it out.</p>
<h3>Does an AIO filter use chemicals or salt?</h3>
<p>No. It uses oxygen from air to oxidize contaminants and regenerates automatically by backwashing.</p>
<h3>Does it need electricity?</h3>
<p>Yes. The control valve plugs into a standard outlet to run its automatic backwash schedule.</p>
<h3>Should it be installed before a water softener?</h3>
<p>Yes. Install the AIO filter ahead of a softener or RO system to protect resin and membranes from sulfur, iron, and manganese.</p>
<h3>What is the difference between the 10x54 and 12x48 AIO?</h3>
<p>The 12x48 uses a wider tank that holds more filter media, giving it more capacity for larger homes and higher water demand. The 10x54 is a versatile choice for average-size households and needs less backwash flow from the well pump.</p>

12" X 48" Aio Hydrogen Sulfide Filter System | Air Injection Sulfur Water Filter for Well Water

Eliminate rotten egg smell, iron, and manganese from well water without chemicals. This 12" x 48" AIO (Air Injection Oxidation) hydrogen sulfide filter uses a self-regenerating air pocket and 2 ft3 of filter media, controlled by a WS1EE valve. A high-capacity whole-house sulfur water filter for larger homes. Part # 12x48-AIO.

View product
<h2>10" x 54" AIO Hydrogen Sulfide Filter for Well Water</h2>
<p>Get rid of the rotten egg smell for good. The 10x54 AIO is a complete single-tank <strong>air injection hydrogen sulfide filter</strong> that removes sulfur odor, iron, and manganese from well water with no chlorine, peroxide, or potassium permanganate. Its 10" x 54" tank holds more filter media than compact models, making it a versatile whole-house sulfur water filter for average-size homes and light commercial applications.</p>
<h2>How the AIO Sulfur Filter Works</h2>
<p>The WS1EE control valve maintains a pocket of air at the top of the tank. As water passes through the air head, dissolved hydrogen sulfide (H2S), iron, and manganese are oxidized into solid particles that are trapped by the media bed. During each automatic backwash, the trapped contaminants are flushed to drain and fresh air is drawn in to recharge the oxidation zone, so the system regenerates itself with no chemicals to add.</p>
<h2>Key Features</h2>
<ul>
<li>Removes hydrogen sulfide (rotten egg odor)</li>
<li>100% chemical-free air injection oxidation</li>
<li>Self-regenerating air pocket recharged on every backwash cycle</li>
<li>WS1EE control valve with automatic, programmable backwash</li>
<li>Stops black, orange, and brown staining on fixtures and laundry</li>
<li>Protects water softeners, RO membranes, and water heaters from sulfur and iron fouling</li>
<li>Tall 54" tank provides a deeper media bed for whole-house treatment</li>
</ul>
<h2>Specifications</h2>
<table>
<tbody>
<tr>
<td>Part number</td>
<td>10x54-AIO</td>
</tr>
<tr>
<td>Tank size</td>
<td>10" x 54"</td>
</tr>
<tr>
<td>Control valve</td>
<td>WS1EE</td>
</tr>
<tr>
<td>Media volume</td>
<td>1.5 ft3</td>
</tr>
<tr>
<td>Inlet / outlet</td>
<td>1" or 1.25"</td>
</tr>
</tbody>
</table>
<h2>What's Included</h2>
<ul>
<li>10" x 54" mineral tank</li>
<li>WS1EE air injection control valve</li>
<li>1.5 ft3 of filter media</li>
<li>Support bed and distributor tube</li>
</ul>
<h2>Is the 10x54 the Right Size?</h2>
<p>The 10" x 54" AIO filter is a popular choice for average-size households. Before installing, confirm that your well pump can deliver the backwash flow rate the system requires. For smaller homes, consider the 9" x 48" model; for larger homes, higher flow rates, or heavier sulfur levels, browse our full range of <a href="/aio-hydrogen-sulfide-removal-systems">AIO hydrogen sulfide removal systems</a>.</p>
<h2>Frequently Asked Questions</h2>
<h3>Will this filter remove the rotten egg smell from my well water?</h3>
<p>Yes. The air injection process oxidizes hydrogen sulfide gas, the cause of the rotten egg smell, and the media bed filters it out.</p>
<h3>Does an AIO filter use chemicals or salt?</h3>
<p>No. It uses oxygen from air to oxidize contaminants and regenerates automatically by backwashing.</p>
<h3>Does it need electricity?</h3>
<p>Yes. The control valve plugs into a standard outlet to run its automatic backwash schedule.</p>
<h3>Should it be installed before a water softener?</h3>
<p>Yes. Install the AIO filter ahead of a softener or RO system to protect resin and membranes from sulfur, iron, and manganese.</p>
<h3>What is the difference between the 9x48 and 10x54 AIO?</h3>
<p>The 10x54 holds more filter media in a taller tank, giving it more capacity for average-size homes, while the 9x48 is a compact option for smaller households and tight spaces.</p>

10" X 54" Aio Hydrogen Sulfide Filter System | Air Injection Sulfur Water Filter for Well Water

Eliminate rotten egg smell, iron, and manganese from well water without chemicals. This 10" x 54" AIO (Air Injection Oxidation) hydrogen sulfide filter uses a self-regenerating air pocket and 1.5 ft3 of filter media, controlled by a WS1EE valve. A versatile whole-house sulfur water filter for average-size homes. Part # 10x54-AIO.

View product
<h2>9" x 48" AIO Hydrogen Sulfide Filter for Well Water</h2>
<p>Get rid of the rotten egg smell for good. The 9x48 AIO is a complete single-tank <strong>air injection hydrogen sulfide filter</strong> that removes sulfur odor, iron, and manganese from well water with no chlorine, peroxide, or potassium permanganate. Its compact 9" x 48" tank makes it a cost-effective sulfur water filter for smaller homes, cabins, cottages, and point-of-entry applications with lower water demand.</p>
<h2>How the AIO Sulfur Filter Works</h2>
<p>The WS1EE control valve maintains a pocket of air at the top of the tank. As water passes through the air head, dissolved hydrogen sulfide (H2S), iron, and manganese are oxidized into solid particles that are trapped by the media bed. During each automatic backwash, the trapped contaminants are flushed to drain and fresh air is drawn in to recharge the oxidation zone, so the system regenerates itself with no chemicals to add.</p>
<h2>Key Features</h2>
<ul>
<li>Removes hydrogen sulfide (rotten egg odor)</li>
<li>100% chemical-free air injection oxidation</li>
<li>Self-regenerating air pocket recharged on every backwash cycle</li>
<li>WS1EE control valve with automatic, programmable backwash</li>
<li>Stops black, orange, and brown staining on fixtures and laundry</li>
<li>Protects water softeners, RO membranes, and water heaters from sulfur and iron fouling</li>
<li>Compact 9" x 48" footprint for tight utility rooms and well houses</li>
</ul>
<h2>Specifications</h2>
<table style="width: 38.9356%; height: 210px;">
<tbody>
<tr style="height: 21px;">
<td style="width: 49.7554%; height: 21px;">Part number</td>
<td style="width: 40.0939%; height: 21px;">9x48-AIO</td>
</tr>
<tr style="height: 21px;">
<td style="width: 49.7554%; height: 21px;">Tank size</td>
<td style="width: 40.0939%; height: 21px;">9" x 48"</td>
</tr>
<tr style="height: 21px;">
<td style="width: 49.7554%; height: 21px;">Control valve</td>
<td style="width: 40.0939%; height: 21px;">WS1EE</td>
</tr>
<tr style="height: 21px;">
<td style="width: 49.7554%; height: 21px;">Media volume</td>
<td style="width: 40.0939%; height: 21px;">1ft3</td>
</tr>
<tr style="height: 42px;">
<td style="width: 49.7554%; height: 42px;">Inlet / outlet</td>
<td style="width: 40.0939%; height: 42px;">1" or 1.25"</td>
</tr>
</tbody>
</table>
<h2>What's Included</h2>
<ul>
<li>9" x 48" mineral tank</li>
<li>WS1EE air injection control valve</li>
<li>1ft3 of filter media</li>
<li>Support bed and distributor tube</li>
</ul>
<h2>Is the 9x48 the Right Size?</h2>
<p>The 9" x 48" AIO filter is best suited to smaller households. Before installing, confirm that your well pump can deliver the backwash flow rate the system requires. For larger homes, higher flow rates, or heavier sulfur levels, browse our full range of&nbsp;<a href="/aio-hydrogen-sulfide-removal-systems">AIO hydrogen sulfide removal systems</a>.</p>
<h2>Frequently Asked Questions</h2>
<h3>Will this filter remove the rotten egg smell from my well water?</h3>
<p>Yes. The air injection process oxidizes hydrogen sulfide gas, the cause of the rotten egg smell, and the media bed filters it out.&nbsp;</p>
<h3>Does an AIO filter use chemicals or salt?</h3>
<p>No. It uses oxygen from air to oxidize contaminants and regenerates automatically by backwashing.</p>
<h3>Does it need electricity?</h3>
<p>Yes. The control valve plugs into a standard outlet to run its automatic backwash schedule.</p>
<h3>Should it be installed before a water softener?</h3>
<p>Yes. Install the AIO filter ahead of a softener or RO system to protect resin and membranes from sulfur, iron, and manganese.</p>

9" X 48" Aio Hydrogen Sulfide Filter System | Air Injection Sulfur Water Filter for Well Water

Eliminate rotten egg smell, iron, and manganese from well water without chemicals. This compact 9" x 48" AIO (Air Injection Oxidation) hydrogen sulfide filter uses a self-regenerating air pocket and filter media, controlled by a WS1EE valve. Removes hydrogen sulfide and iron. Ideal for smaller homes, cabins, and light-demand well systems.

View product
EN English Flag
ES Spanish Flag