Clack Water Specialist · 1"
Clack WS1 Control Valve
Official specifications, applications, manuals and replacement parts.
Request a QuoteThe Clack WS1 is the 1-inch control valve in Clack Corporation's Water Specialist line. It is used on residential and light commercial water softeners and filters, and fits tanks with the standard 2.5" thread.
The same valve is set up as a softener (with a brine injector), a regenerating filter or a backwash-only filter by changing the injector, plugs and pistons according to the compatibility table in the official manual.
Official manuals
The specifications on this page are taken from these Clack documents. Follow the official manual for installation and programming.
Clack WS1 specifications
| Service flow (includes bypass and meter) | 27 gpm (102.2 lpm, 6.1 m³/h) at 15 psi drop |
|---|---|
| Backwash flow (includes bypass) | 27 gpm (102.2 lpm, 6.1 m³/h) at 25 psi drop |
| Cv service / backwash | 7.0 / 5.4 |
| Operating pressure | 20 – 125 psi (138 – 862 kPa) |
| Operating temperature | 40 – 110 °F (4 – 43 °C) |
| Inlet / outlet | 0.75" to 1.5" NPS (depends on the installation fitting) |
| Drain line | 0.75" to 1" NPT |
| Brine line | 3/8" or 1/2" OD polyethylene tubing |
| Regenerant refill rate | 0.5 gpm (1.90 lpm) |
| Distributor tube | 1.05" OD (3/4" NPS) |
| Tank connection | 2.5"-8 NPSM |
| Power supply | Input 100-120 VAC (US) or 100-240 VAC (international), 50/60 Hz; output 15 VDC |
| Shipping weight | 4.5 lb (2.0 kg) |
What it is used for
- ✓ Residential and small-building water softeners, metered or time clock.
- ✓ Carbon, multimedia, iron and neutralizing filters with automatic backwash.
- ✓ Prefiltration and softening ahead of reverse osmosis and UV equipment in purification plants.
- ✓ Twin-tank systems with the 1" motorized alternating valve (MAV).
Parts and accessories for the WS1
Compatible valves, fittings, meters, drain line flow controls and bypass valves. Wholesale pricing with a dealer account.
1” & 1.25” Motorized Alternating Valve
View product1" Flow Washers
View product
Clack V3007 1” PVC Male NPT Elbow Assembly
View product
Clack V3007-01 ¾” X 1” PVC Solvent Elbow Assembly
View product
Clack V3007-02LF 1" Brass Sweat Assembly LF
View product
Clack V3007-04 1" Plastic Male NPT Assembly
View product
Clack V3007-06 1” Plastic Male BSPT Assembly
View product
Clack V3007-13LF 1” SharkBite® Assembly
View product
Clack V3007-16 1” PVC Male BSPT Elbow Assembly
View product
Clack V3007-17 1” John Guest® Straight QC
View product
Clack V3007-20 1" John Guest® Fitting
View product
Clack WS1EE, WS1TC 1” Valve for Softener and Filter
View product
V3039 Inline Plastic Flow Meter for Clack WS1
View product
V3069FF-01 1” & 1.25” Motorized Alternating Valve(MAV)
View product
V3070-FF 1” & 1.25” No Hard Water Bypass Valve
View product
V3070-FM 1” & 1.25” No Hard Water Bypass Valve
View product
WS1 1" Drain Elbow Retain
View product
WS1 3/4" Drain Elbow & Retain with Silencer Assembly
View product
WS1 3/4" Drain Elbow & Retain Without Silencer Assembly
View product
WS1 Ftg Drain 1 Straight with Silencer
View product
WS1 Ftg Drain 1 Straight Without Silencer
View productOther Clack models
Frequently asked questions
What is the flow rate of the Clack WS1 valve?
According to Clack's official manual, the WS1 has a service flow of 27 gpm (6.1 m³/h) at 15 psi drop, including bypass and meter, and a backwash flow of 27 gpm at 25 psi drop.
What tank does the Clack WS1 fit?
The WS1 mounts on tanks with a 2.5"-8 NPSM thread and uses a 1.05" OD (3/4" NPS) distributor tube.
Can the WS1 be used as both a filter and a softener?
Yes. The same valve is configured as a softener, a regenerating filter or a backwash-only filter by changing the injector, plugs and pistons according to the compatibility table in the manual.
Where can I find the Clack WS1 manual?
The official WS1 and WS1.25 drawings and service manual is linked on this page as a PDF. This page summarizes the key specifications; follow the manual for installation and programming.
Need WS1 valves or parts?
We export Clack valves and parts to water treatment dealers across Latin America from Pembroke Park, FL. Tell us the model and quantity and we will confirm wholesale pricing, availability and lead time.