CONTROLSTIK II™ SYSTEM
Engineering Specifications:
Rinse water usage shall be minimized by means of automatic conductivity control systems. They shall consist of a temperature compensated conductivity sensor, corrosion resistant one-inch solenoid valve, and transformer box which safely reduces line power to the sensor. Enclosure shall be fiberglass with heavy rubber gasket and 316 stainless steel. Circuitry shall be solid-state, and unaffected by changes in voltage. Setpoint adjustment shall be on sensor to minimize tampering. Rinse tank controls shall be Myron L Model 597 or approved equal.
Transformer Box Specifications:
| Input Power | Choice of 110 or 220 VAC, 50/60 Hz; |
| Automatic voltage regulation insures operation of the systems from 105-125V or 210-250V respectively. | |
| Output | 24 volts @ 600 mA AC |
| Maximum Power Consumption | @ 117V: 12 watts (103 milliamps) |
| Enclosure | IP65/NEMA 4X fiberglass case with heavy gasket and 316 stainless steel hardware. |
| Lights | LEDs indicate POWER (red) and VALVE (yellow) |
| Electrical Installation | Either HARDWIRE with 5/8 in. conduit; or PLUG-IN with 8 ft./2,4 meter, 18 ga. 3-conductor plug. |
| (supplied with 110V systems only) | |
| Mounting | Flange on enclosure for easy wall mounting |
| Dimensions | 184 H x 197 W x 127 D mm/ 7.25 H x 7.75 W x 5 D in. |
Sensor Specifications:
| Ranges | 5-500 micromhos (for high quality water) |
| 500-5000 micromhos (for normal tap water) | |
| Power | 1 volt AC (from transformer box) |
| On-Off Span | Approximately 5% of setpoint |
| Temperature Compensation | Automatic to 25°C/77°F up to 82°C/180°F |
| Materials | Epoxy and 316 stainless steel |
| Cable | 10 ft./3 meter 22 ga., 4-conductor, vinyl jacketed |
| Installation | Corrosion-proof ABS bracket supplied |
| Dimensions | 304 L x 25 Dia. mm/12 L x 1 Dia. in. |
Solenoid Valve Specifications:
| Size | 1 in. NPT normally closed; compatible with plastic or metal piping |
| Power | 24 volts @ 200 mA AC |
| (from transformer box) | |
| Materials | Body: glass reinforced nylon |
| Diaphragm: nylon reinforced BUNA N synthetic rubber | |
| All exposed metal: stainless steel | |
| Operating Pressure | 10-100 psi / 0,69-6,90 bar |
| Miscellaneous | adjustable flow control |
| manual override | |
| anti-hammer closing | |
| conduit connector |
Data Sheet
ES